One Platform.
Every Hypervisor.
Anywhere.
Edge Command is a lightweight virtual appliance that connects your existing infrastructure to Cloud Command — giving you unified management, monitoring, and optional cloud services across every hypervisor you run, wherever it lives.
You didn't standardize on one hypervisor.
Nobody does.
You deployed Proxmox five years ago because it was free and worked. You picked up Scale HyperCore a year later for a client who wanted simplicity. Three months ago you stood up a NodeWeaver cluster because the footprint mattered. Now you are logging into three different interfaces, running three different monitoring tools, and getting three different sets of alerts. None of them talk to each other.
Multiple interfaces
Managing Proxmox, HyperCore, or NodeWeaver means logging into each one separately. There is no unified view.
No multi-tenancy
Most hypervisors were not built for MSP use. Tenant isolation, resource pools, and per-client billing don't exist natively.
Cloud is an afterthought
Replication, DR, and cloud burst are separate products from separate vendors. Getting them to work together is your problem.
Install one agent. Manage everything from Cloud Command.
Edge Command is a virtual appliance that weighs almost nothing — 1 vCPU, 512MB RAM, under 2.5GB of disk. Deploy it on any supported hypervisor, at any location, and it connects back to Cloud Command automatically. From that moment on, every VM on that platform is visible, manageable, and optionally connected to cloud services from the same interface you use for everything else.
Unified Fleet Management
Every hypervisor, every cluster, every VM in one place. Manage, monitor, and operate your entire infrastructure from Cloud Command regardless of what's running underneath.
True Multi-Tenancy
Create isolated tenant environments with dedicated resource pools, access controls, and white-label branding. Each client sees only what's theirs.
Tiny Footprint
One vCPU, 512MB RAM, and under 2.5GB of disk. Deploys in minutes on any supported platform without disrupting existing workloads.
Optional Edge-to-Cloud Replication
When you're ready, replicate any VM from your edge to any Cloudasys datacenter in the same native platform. No translation layers, no lock-in. RTOs go from hours or days to minutes.
Encrypted Cloud Link
Secure overlay networking connects your clusters to Cloud Command without exposing them to the internet. Works behind NAT, through corporate firewalls, no inbound ports required.
Optional DRaaS
Block-level incremental replication with RPOs down to minutes. Enable it when your customers need it. Skip it when they don't.
Built to work with the platforms your clients already run
We don't ask you to rip and replace. Edge Command connects to the hypervisors you already have. We go deep on the platforms that matter in the markets we serve rather than offering shallow support for every platform on the market.
Proxmox VE
Live in production. Full VM lifecycle, multi-tenancy, resource pools, snapshot management, and cloud replication.
Scale Computing HyperCore
Live in production. Purpose-built integration including console access, snapshot scheduling, and cluster health monitoring.
NodeWeaver
Integration in active development. Open architecture makes NodeWeaver a strong fit for cost-conscious edge deployments.
XCP-ng
Under evaluation. Open-source virtualization platform based on Xen, offering a powerful alternative for enterprise deployments.
Harvester
Planned integration. Kubernetes-native hypervisor for teams running containerized and VM workloads side by side.
StorMagic SvHCI
Planned integration. Designed for lightweight edge deployments where weight and footprint matter.
Don't see your platform? We evaluate new integrations based on where our partners actually deploy. Get in touch and tell us what you're running.
If you manage infrastructure for more than one customer or team, Edge Command was built for you.
Managed Service Providers
You manage infrastructure across multiple clients, possibly running different hypervisors at different sites. Edge Command gives you one console for all of it, multi-tenant isolation so clients never see each other, and optional cloud services to add revenue without adding complexity.
- Unified management across all client sites
- Per-tenant resource pools and access controls
- White-label branding options
- Optional cloud burst and DRaaS revenue
Enterprise IT and Multi-Site Operations
You have multiple locations, multiple departments, and possibly multiple hypervisor platforms across your estate. Edge Command brings centralized visibility and control without requiring a rip and replace of existing infrastructure.
- One dashboard for every site and cluster
- Department-level resource isolation
- Internal chargeback reporting
- Hybrid cloud flexibility when you need it
Hypervisor Resellers and VAR Partners
You sell and deploy HyperCore, Proxmox, or NodeWeaver for your clients. Edge Command turns those deployments into a managed service you can charge for monthly, with optional cloud services layered on top when your clients are ready.
- Remote management of every customer cluster
- Add DR replication as a revenue service
- Recurring revenue on top of hardware sales
- One interface regardless of what you sold them
Three steps from your existing infrastructure to unified cloud management
Deploy the Agent
Import the Edge Command virtual appliance to any supported hypervisor at any location. It auto-connects to Cloud Command via Cloud Link. No inbound firewall rules, no VPN setup, no configuration headaches. Takes about ten minutes.
Create Tenants & Assign Resources
Set up client or department accounts with resource quotas, access controls, and optional branding. Each tenant sees only their own VMs and resources. You see everything.
Manage, Monitor, and Optionally Grow
Every VM is visible and manageable from Cloud Command. Turn on replication, DRaaS, or cloud burst when your clients need it. Leave them off when they don't. The platform grows at the pace your business does.
Per physical CPU. Every feature included. No surprises.
Pricing is based on the physical CPUs in your hypervisor chassis. All features — fleet management, multi-tenancy, monitoring, Cloud Link, and optional cloud services — are included at every tier. You only pay more when your infrastructure grows.
Month-to-Month
Maximum flexibility
- Cancel anytime
- All features included
- Premium support
1 Year
10% savings
- Annual commitment
- All features included
- Premium support
- +5% off if prepaid
3 Year
20% savings
- 3-year commitment
- All features included
- Premium support
- +5% off if prepaid
5 Year
30% savings
- 5-year commitment
- All features included
- Premium support
- +5% off if prepaid
Example: 3-Node Cluster (Dual CPU per node)
6 physical CPUs × $38.00/CPU/mo × 36 months (3-year prepaid with 5% discount) = $8,208.00 total for unlimited tenants, unlimited VMs
Everything You Need to Run a Cloud Business
Tenant Management
Create isolated customer environments with dedicated resource pools and granular permissions.
VM Lifecycle
Create, clone, snapshot, migrate, and delete VMs. Full power management, console access with paste and onscreen keyboard, and ISO mounting.
Resource Pools
Allocate CPU, RAM, and storage quotas per tenant. Prevent overcommit and ensure fair sharing.
Cloud Link
Secure encrypted tunnels connect clusters without firewall changes. Works behind NAT, through corporate proxies.
Usage Analytics
Track resource consumption per tenant, per VM. Historical data, trend analysis, and exportable reports.
Cloud Bursting
When on-prem capacity runs out, seamlessly provision VMs in our datacenter. Same console, same workflow.
DR Replication
Replicate VMs from edge to cloud for disaster recovery. Block-level and incremental with RPOs down to minutes. Just a static route in your firewall, no complicated IPSec tunnels.
Health Monitoring
Real-time cluster health, node status, and storage metrics. Proactive alerts before problems become outages.
Built-in SD-WAN
Securely connect to your Edge VMs via our Cloud Networks. Encrypted zero-trust connectivity without the complexity.
Ready to manage everything from one place?
Get Edge Command running on your first cluster today. Our team will walk you through deployment and have you up and running in under an hour.
- Guided onboarding with our team
- Works with Proxmox, HyperCore, and more
Frequently Asked Questions
Which hypervisors does Edge Command support?
Proxmox VE and Scale Computing HyperCore are in production today. NodeWeaver integration is in active development. XCP-ng is being evaluated. Harvester and StorMagic are planned. We evaluate new integrations based on where our partners are actually deploying.
Do I have to use Cloudasys cloud services?
No. Replication, DRaaS, and cloud burst are completely optional and not enabled by default. Edge Command is fully useful as a fleet management and unified monitoring platform without ever connecting a single cloud resource. Cloud services are there when you and your clients want them.
How does Cloud Link connectivity work?
Cloud Link creates an encrypted overlay network between your infrastructure and Cloud Command. It works through NAT, corporate firewalls, and requires no inbound ports. Outbound HTTPS only. VMs keep running locally if connectivity is interrupted. Management resumes automatically when it restores.
Can I manage clusters at customer sites?
Yes. That is one of the primary use cases. Deploy an Edge Command appliance at each customer site and manage all of them from a single Cloud Command console. Each customer sees only their own resources. Note: each customer cluster requires its own Edge Command subscription based on the physical CPUs in their chassis.
What happens if a client wants replication or DR later?
Turn it on. Replication and DRaaS are features you enable per tenant when the time is right. There is no migration, no reinstall, and no downtime. The same Edge Command agent that was managing the fleet starts handling replication the moment you enable it.
Can workloads replicate from edge to cloud and back?
Yes. Edge-to-Cloud replication works in both directions. A workload running on Proxmox at the edge can replicate to any Cloudasys datacenter running Proxmox. Cloud-to-Edge works the same way. Same native platform both sides, no translation layers.
How small is the Edge Command appliance footprint?
One vCPU, 512MB RAM, and under 2.5GB of disk. It runs quietly alongside your existing workloads and has no measurable impact on cluster performance.
What about Scale Computing Fleet Manager?
Edge Command adds everything Fleet Manager lacks — true multi-tenancy, per-tenant resource isolation, white-label branding, integrated billing, and optional cloud services — in a single platform that also manages your non-HyperCore infrastructure. If you outgrew Fleet Manager or never wanted to pay for it, Edge Command is the answer.
Multi-Hypervisor Management for MSPs and Enterprise IT
The reality for most MSPs and IT teams is that they didn't standardize on one hypervisor — and they never will. You deployed what made sense at the time: Proxmox because it was free and powerful, HyperCore because a client wanted simplicity, NodeWeaver because the footprint mattered. Now you're juggling multiple management interfaces, multiple monitoring tools, and multiple sets of credentials.
Edge Command changes that equation. It's a lightweight virtual appliance that connects any supported hypervisor to Cloud Command, giving you unified management, monitoring, and optional cloud services across your entire fleet. One platform. Every hypervisor. Anywhere.
Why MSPs Choose Edge Command
Managed Service Providers need multi-tenancy that most hypervisors don't provide natively. Edge Command delivers true tenant isolation with dedicated resource pools, access controls, and white-label branding. Each client sees only their own VMs and resources. You see everything from one console.
But Edge Command isn't just about management. When your clients are ready for cloud services — replication, disaster recovery, or cloud burst — you turn them on. No migration, no reinstall, no new platform to learn. The infrastructure you already manage becomes cloud-connected the moment you need it to be.
Enterprise and Multi-Site Operations
Enterprise IT teams use Edge Command to manage hypervisor deployments across business units, departments, or geographic regions. Each group gets their own resource pool and access controls. IT maintains central visibility and governance. When a department needs more capacity than their local cluster provides, cloud burst gives them instant resources without a procurement cycle.
Edge Command doesn't ask you to rip and replace. It connects to the infrastructure you already have, wherever it lives, and gives you a single management plane for all of it.